Analog Multimeter $36.25

Here is a Multimeter that everyone should own. It is a Deluxe Analog Multimeter with Transistor Checker and much more. Assembled, Calibrated and Tested. Rugged analog meter with transistor HFE test and continuity buzzer. Measures 4 1/2" x 6" x 1 1/2". This meter belongs in every shop, school and home. Will give many years of reliable service. Almost unbreakable cabinet.

29 Ranges / 7 Functions
10,000 ohm/VAC
3 to 1000VDC
10 to 1000VAC
Resistance 0 to 10 Meg (Center 10 Ohms)
30,000 ohms / Volt DC
Large 4" Meter with 90 degree mirrored Scale with Knife edge pointer
Battery Condition Tester
Current to 10A DC
Continuity Buzzer
Fuse & Diode Protected
Polarity Reversal Switch
Pivot and Jewel Mechanism Meter Movement
2 Year Warranty

Analog Multimeter $36.25

Low Cost Meter - Basic with HFE Test $11.00

Banana plug to test probe. 69cm (27") cord. Set of 2 (1 red / 1 black)

3-1/2 Digit LCD
Basic DCV Accuracy 0.5%
DC Current 10A
Diode Test
HFE Test
2 Year Warranty

Low Cost Meter - Basic with HFE Test $36.25

Digital Multimeter- True RMS & Computer Interface $139.95

This multimeter includes a built-in computer interface, you can connect it directly into your PC via the serial port. With its data logging feature, you can monitor any system with a variable sampling rate for extended periods of time without supervision. The data is instantaneously displayed on your computer with its sampling rate and measurement in chart form. The continuous samples are automatically charted for graphical analysis. The DMR-5200 brings you quality, reliability and features unsurpassed by any other meter in this price range. Comes complete with carrying case, software, RS232C cable, temperature adapter & K-type thermocouple.

Features:<
3-3/4 Digit LCD
Auto Power Off
Back Light
Bargraph
Capacitance
Continuity Buzzer
Data Hold
Decibel
Diode Test
Dual Display
Frequency
Inductance
Min / Max Mode
RS232 Interface
Temperature
Time
Voltage AC - RMS
2 Year Warranty

Digital Multimeter- True RMS & Computer Interface $139.95

Standard Meter with Transistor and Capacitance - Test Equipment $48.95

Extra Large 1" display Extra Large 1" display
Transistor test
Overload protection
Capacitance to 20µF
Diode test
Audible continuity test

AC/DC Current to 20A
AC + DC Volts 200mV, 2V, 20V, 200V, 1000V, 750VAC
Accuracy: DC .5%, AC 1% Resolution .1mV
AC + DC Current: 200µA(DC only), 2mA, 200mA, 20A

Accuracy: DC 1%, AC 1.5%, 20A 2% Resolution .1µA
Resistance: 200 ohm, 2K ohm, 20K ohm, 200K ohm, 2M ohm
Accuracy: .8%, 3% 20M ohm Resolution .1 ohm
Capacitance 2µF, 20µF, 2nF, 20nF, 200nF
Accuracy 3% Resolution .1pF
Temperature -20°C to 1370°C or 0°F to 1999°F
Accuracy 3% Resolution 1°

Takes 1 week to receive

Standard Meter with Transistor and Capacitance - Test Equipment $48.95

Personal Oscilloscope $146.95

At last everybody can afford an oscilloscope. The Velleman PersonalScope is not a graphical multimeter but a complete and portable oscilloscope, with the dimensions and at the cost of a good multimeter. Its high sensitivity - max. 5mV/div - and extended scope functions make this unit ideal for hobby, service, automotive and development purposes. The PersonalScope's favorable price/quality ratio makes it ideal for educational use. You can perform measurements on audio equipment, mains voltage applications, digital signals, all kind of sensors, signal analysis in automotive applications, car stereos, etc... The state-of-the-art RISC processor operating at 20MHz provides the processing power for the ultrafast, fully automatic setup function, which makes measuring waveforms very easy.

Features:
BNC input connector
9VDC power supply
Max. 20h of autonomy with alkaline batteries (5pcs type AA)
Ideal for : audio trouble shooting / car diagnostics / service and development.

Screenshots:

Specifications:
Maximum sample rate : 5MHz
Input amplifier bandwidth : 1MHz (-3dB at 1V/div setting) 1Mohm//20pF (standard probe)
Vertical resolution : 8 bit (6 bit on LCD)
LCD graphics : 64 x 128 pixels
dBm measurements : from -73dB to +40dB (up to 60dB with X10 probe) ± 0.5dB
True rms AC measurement : 0.1mV to 80V (400Vrms with X10 probe) 2.5% accuracy
Time base : 20s to 2µs / div in 22 steps
Input sensitivity range : 5mV to 20V/div in 12 steps (up to 200V/div with X10 probe)
Power supply : 9Vdc / min. 300mA adapter
Battery life : up to 20 hours with alkaline batteries
Includes soft carrying case
Safety : meets IEC1010-1 600V Cat II, pollution degree 1
Dimensions : 105 x 220 x 35mm (4.1" x 8.7" x 1.4")
Weight : 395g (14oz.) (batteries excl.)

Personal Oscilloscope $48.95

Logic Probe Kit $19.95

Digital logic probe in kit form provides convenient and precise use in measurement of logic circuits. It displays logic levels (high or low), pulses and voltage transients down to 30 nanoseconds and a maximum input of 20MHz. Large PC board and detailed manual for fast construction

Logic Probe Kit $19.95

Logic Pulser Kit $19.95

The logic pulser kit is a desirable device in the troubleshooting of logic circuits and compliments the logic probe in pulse tracing signals in complex circuits. It injects a signal directly into a circuit without having to disconnect components. It is circuit powered and has a switchable output of .5 or 400Hz at 100MA.

Logic Pulser Kit $19.95